EPDM automotive rubber seal advantages

EPDM automotive rubber seal has the following advantages:
A: temperatures as high as 125 degree Celsius interval use of 175 degree Celsius
B:outstanding performance on resistance ultraviolet and weather
C:remained thermal conductivity
D:very low Bibulous rate and water vapor permeability
E:not need extra coat protective cover, Even in outdoor using
F:easy to install

EPDM automotive rubber seal

Waterproof EPDM automotive rubber seal installation Notice
1.Before installation, compatibility test between rubber strip and coating profile is required
2.Before installation, strips should be unpacked and put in room temperature over 24 hours
3.Clean the parts where need installed rubber strip
4.Some tooling and fixtures are required during installation, e.g.: rolling wheel, 90 degree angle knife, emollient
may require to speed up the installation, e.g.: Silicon oil, lye
5.Don’t pull strip to fit the profile, keep strip1~1.5% longer than structural material to prevent shrink in cold weather
6.When meet corner, 45 degree cut off instead of completely cut off, and use proper adhesive or thermal welding for bonding.

This article comes from http://www.xingyuanseals.com/Product/